Aufgrund derzeit hohem Spamaufkommens werden neue Nutzer sehr restriktiv behandelt. Nach kurzer "Bewährungszeit" hat man als normaler Nutzer weitreichende Rechte und benötigt auch kein Captcha mehr.
.
Nutzer, die sich danach dennoch als Spammer oder Trolle erweisen, können jederzeit wieder auf diesen Status zurückgesetzt oder gebannt werden.
Dasselbe gilt für Versuche, politische Überzeugungen kund zu tun, egal aus welcher Richtung diese kommen.
.
.:!: Achtung! Derzeit ist Robonect (noch) nicht mit dem Automower 305 ab Baujahr 2020 zusammen mit der neuen Mäher-FW MSW 41.4.0 kompatibel!
Aber: Im DailyBuild ist ein Patch enthalten, der getestet werden kann! (Stand 15.02.2024)
.
.Du hast Deinen Gardena-Mäher auf die Gardena-Firmware von 2023 aktualisiert?
.:arrow: Testmöglichkeit für das Daily Build.

Das FW-Update am Mäher wird dennoch nicht empfohlen, da das Daily Build nach aktuellen Berichten von Beta-Testern noch keine vollständige Kompatibilität gewährleisten kann! (Stand: 15.02.2024)
Wir empfehlen, das Gardena-Update noch nicht durchzuführen!

.
.

More settings to remote start/fernstart

Funktionswünsche ab 2018 bis einschließlich Beta 7a
Falls Du in der aktuellen Firmware einen Wunsch hast, der bereits in Beta 7a formuliert wurde, schreibe bitte Deine Unterstützung dafür in einem Beitrag
-> dann wird dieses Thema ins aktuelle Wunsch-Forum verschoben! Versprochen!
Atman
Forum-Nutzer
Beiträge: 23
Registriert: Di 30. Apr 2019, 13:36
Wohnort: Sweden
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.1b

More settings to remote start/fernstart

Beitrag von Atman »

Hi! I would like to have more possibilities to the remote start (fernstart?). I want the robot to start at different lenghts of the guide cable each time. This is since I will use the IO-module to have 2 guide cables and switch between them and they have different lenghts. Is it already possible?
Thanks!

Benutzeravatar
shadowkiller
Forum-Veteran
Beiträge: 4467
Registriert: Do 11. Jan 2018, 08:42
Wohnort: Würzburg
Mäher: Husqvarna Automower 315
Firmware des Mähers (MSW): MSW 10.xx.xx
Herstellungsjahr: 2017 (Modell 2018)
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.3 (WLAN 1.7.4)
hat sich bedankt: 159 Male
wurde gedankt: 132 Male

Re: More settings to remote start/fernstart

Beitrag von shadowkiller »

For my AM 315 Robonect offers 5 possibilities of starting to mow at different distances from the charging station. Yes, it’s called „Fernstart“ in German.
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)

Atman
Forum-Nutzer
Beiträge: 23
Registriert: Di 30. Apr 2019, 13:36
Wohnort: Sweden
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.1b

Re: More settings to remote start/fernstart

Beitrag von Atman »

Ok, but can you change that through robonect?
I still would like a feature to switch between two or more "sets" since I will use two different guide wires.

nachtfux
Forum-Anfänger
Beiträge: 1
Registriert: So 26. Mai 2019, 12:33
Mäher: Gardena smart SILENO
Herstellungsjahr: 2018
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: -

Re: More settings to remote start/fernstart

Beitrag von nachtfux »

Hi all

yes normally its possible with a simple webrequest BUT there are some tricky steps in the URL

Code: Alles auswählen

http://IP:ADRESS/job?begin=0&end=1558877400&fs=2&corridor=255&after=3&save=
IP:ADRESS = the IP of your mower
begin= UNIX Time to start -> 0 = now
end= UNIX Time to end -> 1558877400 = 01:30 p.m. in the internet you can finde converter from Integer to Time
fs= Fernstart -> 2 = Fernstart 1, 3 = Fernstart 2, 4 = Fernstart 3, 5 = Fernstart 4

I hope this helps

Benutzeravatar
SenfmitHonig
sehr erfahrener Forum-Nutzer
Beiträge: 457
Registriert: So 30. Okt 2016, 22:39
Wohnort: 943xx
Mäher: Husqvarna Automower 430X
Herstellungsjahr: 2016
Robonect-Modul: Robonect Hx (Rev.2)
Robonect Firmware: V1.3
hat sich bedankt: 4 Male
wurde gedankt: 34 Male

Re: More settings to remote start/fernstart

Beitrag von SenfmitHonig »

Servus!,

I think from version V1.0B7 the password and User should be passed as on part of the link.

Benutzeravatar
shadowkiller
Forum-Veteran
Beiträge: 4467
Registriert: Do 11. Jan 2018, 08:42
Wohnort: Würzburg
Mäher: Husqvarna Automower 315
Firmware des Mähers (MSW): MSW 10.xx.xx
Herstellungsjahr: 2017 (Modell 2018)
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.3 (WLAN 1.7.4)
hat sich bedankt: 159 Male
wurde gedankt: 132 Male

Re: More settings to remote start/fernstart

Beitrag von shadowkiller »

Why not making settings in Robonect for all five possibilities?
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)

Atman
Forum-Nutzer
Beiträge: 23
Registriert: Di 30. Apr 2019, 13:36
Wohnort: Sweden
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.1b

Re: More settings to remote start/fernstart

Beitrag von Atman »

shadowkiller hat geschrieben:
So 26. Mai 2019, 14:26
Why not making settings in Robonect for all five possibilities?
I only have one setting.
Bild

Benutzeravatar
shadowkiller
Forum-Veteran
Beiträge: 4467
Registriert: Do 11. Jan 2018, 08:42
Wohnort: Würzburg
Mäher: Husqvarna Automower 315
Firmware des Mähers (MSW): MSW 10.xx.xx
Herstellungsjahr: 2017 (Modell 2018)
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.3 (WLAN 1.7.4)
hat sich bedankt: 159 Male
wurde gedankt: 132 Male

Re: More settings to remote start/fernstart

Beitrag von shadowkiller »

What’s possible in the mowers settings over its display and keyboard?
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)

Atman
Forum-Nutzer
Beiträge: 23
Registriert: Di 30. Apr 2019, 13:36
Wohnort: Sweden
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: 1.1b

Re: More settings to remote start/fernstart

Beitrag von Atman »

I am not at home now but this should be possible:
Bild

risu
Forum-Nutzer
Beiträge: 32
Registriert: Di 11. Sep 2018, 11:39
Wohnort: France
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2017
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: V1.1b ROB 1000 test

Re: More settings to remote start/fernstart

Beitrag von risu »

Hi,

Interested in your IO-module solution to have 2 guide cables. Please detail how you'll do it.
Meanwhile, my PM clarifies why you only have 1 remote start ;)

Gesperrt

Zurück zu „Wünsche bis Beta 7a“