GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Forumsregeln
Bevor Du Deinen Bug-Verdacht meldest, wurde er vielleicht schon behoben!
Hast Du das aktuelle Daily Bulid schon ausprobiert? Vielleicht ist Dein Bug ja schon gefixt!? Download
Falls das Daily Build Dein Problem nicht lösen konnte, schreibe bitte das Datum aus Deinem installierten Daily Built (schwarze Fußzeile im Robonect-Menü) in Deinen Bug-Bericht dazu! Viel Spaß beim Testen!
Bevor Du Deinen Bug-Verdacht meldest, wurde er vielleicht schon behoben!
Hast Du das aktuelle Daily Bulid schon ausprobiert? Vielleicht ist Dein Bug ja schon gefixt!? Download
Falls das Daily Build Dein Problem nicht lösen konnte, schreibe bitte das Datum aus Deinem installierten Daily Built (schwarze Fußzeile im Robonect-Menü) in Deinen Bug-Bericht dazu! Viel Spaß beim Testen!
- Oceans79
- Forum-Anfänger
- Beiträge: 6
- Registriert: Do 22. Jul 2021, 18:19
- Wohnort: südliches Brandenburg
- Mäher: Husqvarna Automower 315X
- Firmware des Mähers (MSW): MSW 15.xx.xx
- Herstellungsjahr: 2020
- Robonect-Modul: Robonect Hx (Rev.6)
- Robonect Firmware: V1.3b (WLAN 1.7.4)
- hat sich bedankt: 2 Male
GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Hallo zusammen,
In meinem AM 315 mit Connect Modul habe ich seit FW 1.3 keinen Zugriff mehr auf die GPS -Daten des connect Moduls. Im Mäher selbst zeigt er alle Daten an und gibt auch sauber die Position am Display und per App aus.
Im Robonect ein und ausschalten verändert auch nichts im Status des Moduls im Mäher.
Neustart des Mähers, Connect und auch robonect schafft keine Veränderung.
Ist es jemandem noch aufgefallen oder hat eine Lösung für mich?
In meinem AM 315 mit Connect Modul habe ich seit FW 1.3 keinen Zugriff mehr auf die GPS -Daten des connect Moduls. Im Mäher selbst zeigt er alle Daten an und gibt auch sauber die Position am Display und per App aus.
Im Robonect ein und ausschalten verändert auch nichts im Status des Moduls im Mäher.
Neustart des Mähers, Connect und auch robonect schafft keine Veränderung.
Ist es jemandem noch aufgefallen oder hat eine Lösung für mich?
Zufriedener Nutzer der Arbeitskraft von
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
- SenfmitHonig
- sehr erfahrener Forum-Nutzer
- Beiträge: 457
- Registriert: So 30. Okt 2016, 22:39
- Wohnort: 943xx
- Mäher: Husqvarna Automower 430X
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.2)
- Robonect Firmware: V1.3
- hat sich bedankt: 4 Male
- wurde gedankt: 34 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Servus,
ich persönlich würde mal eine Anfrage und das log an den "ADMIN" senden. Der kann das freischalten wenn dein Mäher die Funktion hat aber nicht angezeigt wird.
Es gibt übrigens 2 unterschiedliche GPS Funktionen/Einstellungen ... Du schreibst über die http://RobonectIP/GPS ... oder?
ich persönlich würde mal eine Anfrage und das log an den "ADMIN" senden. Der kann das freischalten wenn dein Mäher die Funktion hat aber nicht angezeigt wird.
Es gibt übrigens 2 unterschiedliche GPS Funktionen/Einstellungen ... Du schreibst über die http://RobonectIP/GPS ... oder?
- Oceans79
- Forum-Anfänger
- Beiträge: 6
- Registriert: Do 22. Jul 2021, 18:19
- Wohnort: südliches Brandenburg
- Mäher: Husqvarna Automower 315X
- Firmware des Mähers (MSW): MSW 15.xx.xx
- Herstellungsjahr: 2020
- Robonect-Modul: Robonect Hx (Rev.6)
- Robonect Firmware: V1.3b (WLAN 1.7.4)
- hat sich bedankt: 2 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Hallo,
ich meine die GPS Funktion des Automower Connect Moduls, es sollte doch ein Menüpunkt vorhanden sein.
Das einzige was ich da aber Finde ist der beschriebene Punkt unter Zubehör. Trotz Connect Modul zeigt es mir unter Status kein GPS als Punkt an.
ich meine die GPS Funktion des Automower Connect Moduls, es sollte doch ein Menüpunkt vorhanden sein.
Das einzige was ich da aber Finde ist der beschriebene Punkt unter Zubehör. Trotz Connect Modul zeigt es mir unter Status kein GPS als Punkt an.
Zufriedener Nutzer der Arbeitskraft von
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
- SenfmitHonig
- sehr erfahrener Forum-Nutzer
- Beiträge: 457
- Registriert: So 30. Okt 2016, 22:39
- Wohnort: 943xx
- Mäher: Husqvarna Automower 430X
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.2)
- Robonect Firmware: V1.3
- hat sich bedankt: 4 Male
- wurde gedankt: 34 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Servus!,
Du brauchst diese Ansicht!
Was Du beschreibst ist das! Meines Wissens gibts dieses Modul nicht (mehr).
Du brauchst diese Ansicht!
Was Du beschreibst ist das! Meines Wissens gibts dieses Modul nicht (mehr).
- Oceans79
- Forum-Anfänger
- Beiträge: 6
- Registriert: Do 22. Jul 2021, 18:19
- Wohnort: südliches Brandenburg
- Mäher: Husqvarna Automower 315X
- Firmware des Mähers (MSW): MSW 15.xx.xx
- Herstellungsjahr: 2020
- Robonect-Modul: Robonect Hx (Rev.6)
- Robonect Firmware: V1.3b (WLAN 1.7.4)
- hat sich bedankt: 2 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Das ist richtig, genau dieser Punkt fehlt mir aber leider, obwohl es aktiviert ist und in der Standort in der Husqvarna App auch angezeigt wird.
- Dateianhänge
-
- Robonect-GPS-fehlt.JPG (23.45 KiB) 1339 mal betrachtet
Zufriedener Nutzer der Arbeitskraft von
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
- SenfmitHonig
- sehr erfahrener Forum-Nutzer
- Beiträge: 457
- Registriert: So 30. Okt 2016, 22:39
- Wohnort: 943xx
- Mäher: Husqvarna Automower 430X
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.2)
- Robonect Firmware: V1.3
- hat sich bedankt: 4 Male
- wurde gedankt: 34 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Servus,
Chach vom Browser hast ja bestimmt schon mal geleert! ...oder?
Zugriff von einem anderen System (Handy, anderer PC, ...) schaut genau so aus?
Robonect wurde schon mal neu gestartet?
--> dann also die Info mit der Bitte um prüfung an "ADMIN" senden...
Chach vom Browser hast ja bestimmt schon mal geleert! ...oder?
Zugriff von einem anderen System (Handy, anderer PC, ...) schaut genau so aus?
Robonect wurde schon mal neu gestartet?
--> dann also die Info mit der Bitte um prüfung an "ADMIN" senden...
- Oceans79
- Forum-Anfänger
- Beiträge: 6
- Registriert: Do 22. Jul 2021, 18:19
- Wohnort: südliches Brandenburg
- Mäher: Husqvarna Automower 315X
- Firmware des Mähers (MSW): MSW 15.xx.xx
- Herstellungsjahr: 2020
- Robonect-Modul: Robonect Hx (Rev.6)
- Robonect Firmware: V1.3b (WLAN 1.7.4)
- hat sich bedankt: 2 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Ja, hab alles schon versucht und inzwischen auch schon weitergeleitet.
Danke aber für Deine Mühe.
Danke aber für Deine Mühe.
Zufriedener Nutzer der Arbeitskraft von
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
Sheldon - Husqvarna AM 415X Bj. 2021
Leo II - Husqvarna AM 315X Bj. 2020 mit Robonect HX+ Rev.6
Reserve - Leonhard AM 315 Bj. 2016 mit Connect sowie Robonect Hx+ Rev.9
und bei der Mama im Garten AM 310 natürlich auch mit Robonect und Connect
-
- Forum-Anfänger
- Beiträge: 9
- Registriert: Fr 15. Jul 2022, 12:19
- Mäher: Husqvarna Automower 330X
- Firmware des Mähers (MSW): MSW 7.xx.xx
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: 1.3
- hat sich bedankt: 2 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Hello,
Did you solve this issue? From one day to the next, my GPS dissapeared from the robonect menue (Status->GPS). First, it showed 0 satellites for a couple of hours, then it dissapeared completely. I have restarted robonect, cleared cach and tried tree different browsers from two devices. I have an 330x upgraded ro 430x and I have read on this forum that owners of 330x have had issues with this before. But, the odd part is that it dissapeared for me, it worked from the beginning. I have also tested to update firmware to 1.3b from 1.3 - same thing.. The option to dissable the GPS navigation under the control menu is also gone. Everything with GPS is gone..
Did you solve this issue? From one day to the next, my GPS dissapeared from the robonect menue (Status->GPS). First, it showed 0 satellites for a couple of hours, then it dissapeared completely. I have restarted robonect, cleared cach and tried tree different browsers from two devices. I have an 330x upgraded ro 430x and I have read on this forum that owners of 330x have had issues with this before. But, the odd part is that it dissapeared for me, it worked from the beginning. I have also tested to update firmware to 1.3b from 1.3 - same thing.. The option to dissable the GPS navigation under the control menu is also gone. Everything with GPS is gone..
-
- sehr erfahrener Forum-Nutzer
- Beiträge: 706
- Registriert: Di 14. Feb 2017, 17:07
- Mäher: Husqvarna Automower 330X
- Firmware des Mähers (MSW): MSW 7.xx.xx
- Herstellungsjahr: 2014
- Robonect-Modul: Robonect Hx (Rev.1)
- Robonect Firmware: V1.3b
- hat sich bedankt: 8 Male
- wurde gedankt: 82 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Hello Strese,
please switch the GPS-supported navigation on and off directly on the mower.
Now please check whether the GPS symbol is shown on the mower display.
If so, then it should be back in Robonect as well.
If there is no symbol in the display, the GPS circuit board of your mower could be defective. In order to rule OUT a Robonect error, please do the above tests with the Robonect removed before replacing the circuit board.
greeting
Lampi
please switch the GPS-supported navigation on and off directly on the mower.
Now please check whether the GPS symbol is shown on the mower display.
If so, then it should be back in Robonect as well.
If there is no symbol in the display, the GPS circuit board of your mower could be defective. In order to rule OUT a Robonect error, please do the above tests with the Robonect removed before replacing the circuit board.
greeting
Lampi
- Bewertung: 14.286%
Fragen? Fragen!
-
- Forum-Anfänger
- Beiträge: 9
- Registriert: Fr 15. Jul 2022, 12:19
- Mäher: Husqvarna Automower 330X
- Firmware des Mähers (MSW): MSW 7.xx.xx
- Herstellungsjahr: 2016
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: 1.3
- hat sich bedankt: 2 Male
Re: GPS bei AM 315 Bj. 2017 mit Connect Modul geht nicht im robonect
Thank you Lampi,
Yes, I suspect there is something wrong with my mower. I have also other strange behaviours (viewtopic.php?f=287&t=4287) that maybe could be explained by this. I wounder if the GPS is part of the "motherboard" of the 330x? Can't find any GPS modules for 330X/430X?
I have been very unlocky with electronics the past 3 months. I am so tired of it. First the stove, then the oven, then pool pump, then the control system for the solar heater for the pool. Now the mower. I have only been able to repair the oven, the other was damaged beyond repair.. Aber, vie schön das Leben ist when alles funktioniert!