[Solved] [V1.0a] Does not respect timer settings

Support für den McCulloch Rob S400, S600, R600, R1000
Antworten
risu
Beiträge: 29
Registriert: Di 11. Sep 2018, 11:39
Wohnort: France
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2017
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: V1.0 ROB 1000 test

[Solved] [V1.0a] Does not respect timer settings

Beitrag von risu » Fr 23. Aug 2019, 12:02

Hi,

Back from business trip last night, i was forced to install firmware V1.0a on my ROB1000.
Everything was fine with V1.0 but now, my robot doesn't respect the timer settings and mows all the time in auto mode :(

It's scary because my robot can be damaged with the sprinklers working. :!:

Can you please have a look at it ?

risu
Beiträge: 29
Registriert: Di 11. Sep 2018, 11:39
Wohnort: France
Mäher: McCulloch ROB R1000
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2017
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: V1.0 ROB 1000 test

Re: [Solved] [V1.0a] Does not respect timer settings

Beitrag von risu » So 25. Aug 2019, 16:42

Finally solve.

I switched off manually the robot through the power button.
Once On again, i saw an unknown timer activated in Robonect.
I deactivated it and reactivated the other ones.
I notice, one of my active timer had an old value.

It's like this last firmware update activated very old timers.
Never happened before.

But problem solved :)

Benutzeravatar
shadowkiller
Beiträge: 1980
Registriert: Do 11. Jan 2018, 08:42
Wohnort: Würzburg
Mäher: Husqvarna Automower 315
Firmware des Mähers (MSW): MSW 10.xx.xx
Herstellungsjahr: 2017 (Modell 2018)
Robonect-Modul: Robonect Hx (Rev.5)
Robonect Firmware: V1.1b

Re: [Solved] [V1.0a] Does not respect timer settings

Beitrag von shadowkiller » Mo 9. Sep 2019, 21:33

Thanks for your report. Maybe you can help others which have the same issue.
WLAN oder Robonect funktioniert nicht? Erstmal die Tipps lesen!
--
Kompendium für Mähroboter: Download ERFAdoc (ca. 4,3 MB, 232 Seiten-PDF) von Fidatex
--
Es ist schon alles gesagt, nur noch nicht von allen. (Karl Valentin)

Antworten

Zurück zu „McCulloch“