Sorry for writing in English...my German is no existent and I don't trust Google translate.
I'm also having problems with push. I have selected most triggers during the testing period and it works fine for a while. I get all notifications for some time but then it just Stop working.
If I go to the mower settings--->push settings and toggle it off and on i get the message "Push. Your unit is now registered" and a button with a chopped text: "Send your for...sh message" (or something like that in Swedish. I have not found how I can change the language in the app so I could report the English or even German text of the message).
When I click on the message I get a push from the mower regarding whatever it's doing at the time. After this push notifications works for a while and then it just Stop working and I have to do the same procedure all over again.
I don't know how long the working period is exactly but It's not longer than a day.
Any suggestions how I can remedy this issue?
App version: 1.3.3 (Build:3247)
iOS: 16.0 (20A362)
Robonect firmware: V1.3
Thanks from Sweden
/Fred
Push doesn't work
Moderator: mufumade
- shadowkiller
- Forum-Veteran
- Beiträge: 4475
- Registriert: Do 11. Jan 2018, 08:42
- Wohnort: Würzburg
- Mäher: Husqvarna Automower 315
- Firmware des Mähers (MSW): MSW 10.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: 1.3 (WLAN 1.7.4)
- hat sich bedankt: 160 Male
- wurde gedankt: 135 Male
App lädt keine aktuelle Daten,Push Klingenwechsel geht nicht...
Please read the documentation of Robonect using google translate or similar. You’re misunderstanding some issues of this difficult and to complex to explain because you’re mixing the push-functionality.
After this, if there are questions anyway, feel free to ask quoting the parts of the documentation you don’t understand.
Sorry, for not being able to help with only one sentence.
After this, if there are questions anyway, feel free to ask quoting the parts of the documentation you don’t understand.
Sorry, for not being able to help with only one sentence.
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)
-
- Forum-Nutzer
- Beiträge: 12
- Registriert: Di 14. Dez 2021, 17:00
- Mäher: McCulloch ROB R600
- Herstellungsjahr: 2017
- Robonect-Modul: noch kein Robonect verbaut
- Robonect Firmware: -
Re: App lädt keine aktuelle Daten,Push Klingenwechsel geht nicht...
The weird thing is that the app have been working flawlessly for several days not without me doing anything at all. I get push notifications from all the triggers I have selected whenever they are triggered.
I'm starting to suspect that the issue might be running the app and the web GUI in parallel. As long as I don't do anything in the web GUI the notifications seams to work fine from the Roboconnect app...but if I do anything in Robonnect web GUI something seams to disrupt this function. Note that I have not done anything at all in the web GUI regarding the push system since I started using the Roboconnect app. The app prompts the user not to touch the push settings in Robonect after activating the settings in the app.
I'll avoid using Robonect web two more days (one week since I started this thread) and after that I'll do some testing to see if this theory has any merit.
I'm starting to suspect that the issue might be running the app and the web GUI in parallel. As long as I don't do anything in the web GUI the notifications seams to work fine from the Roboconnect app...but if I do anything in Robonnect web GUI something seams to disrupt this function. Note that I have not done anything at all in the web GUI regarding the push system since I started using the Roboconnect app. The app prompts the user not to touch the push settings in Robonect after activating the settings in the app.
I'll avoid using Robonect web two more days (one week since I started this thread) and after that I'll do some testing to see if this theory has any merit.
- shadowkiller
- Forum-Veteran
- Beiträge: 4475
- Registriert: Do 11. Jan 2018, 08:42
- Wohnort: Würzburg
- Mäher: Husqvarna Automower 315
- Firmware des Mähers (MSW): MSW 10.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: 1.3 (WLAN 1.7.4)
- hat sich bedankt: 160 Male
- wurde gedankt: 135 Male
App lädt keine aktuelle Daten,Push Klingenwechsel geht nicht...
Have You tried to reconnect Roboconnect to Robonect, yet?
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)
-
- Forum-Nutzer
- Beiträge: 12
- Registriert: Di 14. Dez 2021, 17:00
- Mäher: McCulloch ROB R600
- Herstellungsjahr: 2017
- Robonect-Modul: noch kein Robonect verbaut
- Robonect Firmware: -
Re: Push doesn't work
Well, as I wrote: everything works as it should so I'm not going to do anything until a week has passed with no issues. Then I will test to use Robonects web GUI for other things than notifications to see if I can replicate the problem I had that prompted me to start this thread.
- shadowkiller
- Forum-Veteran
- Beiträge: 4475
- Registriert: Do 11. Jan 2018, 08:42
- Wohnort: Würzburg
- Mäher: Husqvarna Automower 315
- Firmware des Mähers (MSW): MSW 10.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: 1.3 (WLAN 1.7.4)
- hat sich bedankt: 160 Male
- wurde gedankt: 135 Male
Re: Push doesn't work
No, I mean inside the Roboconnect App adding the mover after removing it. Maybe it’s an idea to reinstall the Roboconnect on your iOS device.
Using the webUI over a browser or as an Webapp doesn’t matter to the iOS-App called Roboconnect.
Using the webUI over a browser or as an Webapp doesn’t matter to the iOS-App called Roboconnect.
Anleitung zur Erstinstallation
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)
--
Robonect® Dokumentation (= Gebrauchsanweisung = Bedienungsanleitung) und Support
--
Forum cooler nutzen: Hervorhebungen machen und Screenshots posten
--
Es wurde schon alles gefragt, nur noch nicht von allen. (frei nach Karl Valentin)