UTF8 error connecting MQTT to Home Assistant

[magnushq]

When adding MQTT to Home Assistant, the following message appears when Home Assistant is trying to autoconfigure:

Tue May 15 2018 12:17:05 GMT+0200 (CEST)
Can't decode payload b'33 \xb0C' on homeassistant/health/climate/temperature with encoding utf-8

Is this an error in Robonect FW or in Home Assistant?

[Andreas]

Just a guess, but consider to deactivate the units and only send raw numbers, it looks like there is the "°C" information added right beyond the value, you are interested in.

[Admin]

I think Andreas is right.
@Andreas: Should i remove the "°" or should I encode it UTF8?

[Andreas]

@Andreas: Should i remove the "°" or should I encode it UTF8?

I think a conversation to UTF8 is in general a good idea for data transported via MQTT, but regarding the initial problem of @magnushq it should be sufficient so simply deactivate the hook as marked in the following picture (sorry I cannot decrease the presented size):

MQTT unit deactivation

2018-05-16_Robonect_MQTT-Setup_Web-AndreasLink.de.png (144.8 KiB) 2704 mal betrachtet

This will - as a result - only send the plain numbers to the MQTT broker aka Home Assistant and I assume, then it will be happy. --> @magnushq to verify