Hello,
I've just intalled the robonect Hx on my McCulloch ROB 1000.
No problem for installation
Then, i updated the firmware to the latest V1.0beta7 version.
Once on the interface, i noticed some unexpected things :
- the home page tells me my robot is not compatible and that i should ask for a firmware update.
But i have a ROB 1000 of 2018, it's supposed to be compatible and it looks like it is. Is it a false error message ? I don't have the good firmware ?
- Before buying i asked if the corridor option will be available on the ROB although i don't have it on my robot screen.
Fabian told me yes. But now, when i go to the corridor page i have no option at all
(base searchempty as well)
- My robot as 2 remote starts on its screen. Robonect only shows one
Is there someting i'm missing ?
Thank you.
My ROB1000 details :
Serial number 18*******
Production 04.05.2018 05:18
MSW Software ROB 1000
MSW version 6.17.00
Date MSW 2017-09-13 14:33:13
Sub version 6.01.00
Aufgrund derzeit hohem Spamaufkommens werden neue Nutzer sehr restriktiv behandelt. Nach kurzer "Bewährungszeit" hat man als normaler Nutzer weitreichende Rechte und benötigt auch kein Captcha mehr.
.
Nutzer, die sich danach dennoch als Spammer oder Trolle erweisen, können jederzeit wieder auf diesen Status zurückgesetzt oder gebannt werden.
Dasselbe gilt für Versuche, politische Überzeugungen kund zu tun, egal aus welcher Richtung diese kommen.
.
. Achtung! Derzeit ist Robonect (noch) nicht mit dem Automower 305 ab Baujahr 2020 zusammen mit der neuen Mäher-FW MSW 41.4.0 kompatibel!
Aber: Im DailyBuild ist ein Patch enthalten, der getestet werden kann! (Stand 15.02.2024)
.
.Du hast Deinen Gardena-Mäher auf die Gardena-Firmware von 2023 aktualisiert?
. Testmöglichkeit für das Daily Build.
Das FW-Update am Mäher wird dennoch nicht empfohlen, da das Daily Build nach aktuellen Berichten von Beta-Testern noch keine vollständige Kompatibilität gewährleisten kann! (Stand: 15.02.2024)
Wir empfehlen, das Gardena-Update noch nicht durchzuführen!
.
.
ROB 1000 missing options
-
- Administrator
- Beiträge: 2903
- Registriert: Di 19. Jan 2016, 18:34
- Wohnort: Kiel
- Mäher: Gardena SILENO City 500
- Firmware des Mähers (MSW): MSW 11.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: stets die Allerneuste :-)
- hat sich bedankt: 1 Mal
- wurde gedankt: 59 Male
- Kontaktdaten:
Re: ROB 1000 missing options
I move this to big reports, because I have an idea why it does not work.
Werbefläche zu vermieten.
-
- Forum-Nutzer
- Beiträge: 32
- Registriert: Di 11. Sep 2018, 11:39
- Wohnort: France
- Mäher: McCulloch ROB R1000
- Firmware des Mähers (MSW): MSW 6.xx.xx
- Herstellungsjahr: 2017
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: V1.1b ROB 1000 test
Re: ROB 1000 missing options
New bug :
When i change the parameters of the remote start 1 (frequency & distance), it is not saved.
Always the same values (80% & 50m).
When i change the parameters of the remote start 1 (frequency & distance), it is not saved.
Always the same values (80% & 50m).
-
- Administrator
- Beiträge: 2903
- Registriert: Di 19. Jan 2016, 18:34
- Wohnort: Kiel
- Mäher: Gardena SILENO City 500
- Firmware des Mähers (MSW): MSW 11.xx.xx
- Herstellungsjahr: 2017 (Modell 2018)
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: stets die Allerneuste :-)
- hat sich bedankt: 1 Mal
- wurde gedankt: 59 Male
- Kontaktdaten:
Re: ROB 1000 missing options
I guess, you tried it during mowing? Is the problem still valid?
Werbefläche zu vermieten.
-
- Forum-Nutzer
- Beiträge: 32
- Registriert: Di 11. Sep 2018, 11:39
- Wohnort: France
- Mäher: McCulloch ROB R1000
- Firmware des Mähers (MSW): MSW 6.xx.xx
- Herstellungsjahr: 2017
- Robonect-Modul: Robonect Hx (Rev.5)
- Robonect Firmware: V1.1b ROB 1000 test