AM330X reconnects to WLAN even when it is off

- alle Auffälligkeiten die es zu klären gilt
- Verdacht, dass ein echter Bug vorliegt
- bei WLAN-Bug-Verdacht bitte das angezeigte Supportformular komplett ausfüllen!
Antworten
micleg
Beiträge: 27
Registriert: Sa 1. Jul 2017, 14:36
Wohnort: Linköping, Sweden
Mäher: Husqvarna Automower 330X
Firmware des Mähers (MSW): MSW 4.xx.xx
Herstellungsjahr: 2014
Robonect-Modul: Robonect Hx (Rev.4)
Robonect Firmware: 1.1b

AM330X reconnects to WLAN even when it is off

Beitrag von micleg » Di 26. Nov 2019, 17:39

My AM330X reconnects to my WLAN from time to time (several times a day some days) even though the mower is turned off with the switch and Robonect is set to turn off with main power switch. My biggest concern for this is draining the battery. My Fing box sends me a message each time it connects. After a while it disconnects again.

Anyone else noticed this behaviour?

I have set the mower to charge one hour each week to keep it from discharging during winter and still not wear out the battery by having it at 100% all the time.

/Michael
AM 330X 2014 LED
Robonect 4, 1.1b

Benutzeravatar
SenfmitHonig
Beiträge: 225
Registriert: So 30. Okt 2016, 22:39
Wohnort: 943xx
Mäher: Husqvarna Automower 430X
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2016
Robonect-Modul: Robonect Hx (Rev.2)
Robonect Firmware: V1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von SenfmitHonig » Mi 27. Nov 2019, 14:44

Servus Michael,

how do you do that with the recharge once a week?
Is the WLAN coekivity with the Robonect at the same time as charging?

As for myself, I wouldn't charge the battery that often!
Always 100% is also not always perfect read your manual, there is something for the storage (about the winter)

micleg
Beiträge: 27
Registriert: Sa 1. Jul 2017, 14:36
Wohnort: Linköping, Sweden
Mäher: Husqvarna Automower 330X
Firmware des Mähers (MSW): MSW 4.xx.xx
Herstellungsjahr: 2014
Robonect-Modul: Robonect Hx (Rev.4)
Robonect Firmware: 1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von micleg » Mi 27. Nov 2019, 14:54

Before Robonect I charged it once and stored it during winter. The charge was always close to 100% at spring. With Robonect the battery was empty last spring 😩

I have an electronic timer that supplies power to the charging station one hour once a week.

If it turned off like it should I wouldn't need this. It is not easy to detect this but hardware that checks your wlan can report the connections.

I can't find any other reason for the empty battery though.
AM 330X 2014 LED
Robonect 4, 1.1b

Benutzeravatar
SenfmitHonig
Beiträge: 225
Registriert: So 30. Okt 2016, 22:39
Wohnort: 943xx
Mäher: Husqvarna Automower 430X
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2016
Robonect-Modul: Robonect Hx (Rev.2)
Robonect Firmware: V1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von SenfmitHonig » Mi 27. Nov 2019, 19:17

Servus Michael,
that shouldn't be like that!
Did you terminate Robonect via the web interface?

If so, then this is a bug that should be fixed.
Send the Fabian (Admin) your log file, he can check what will wake up your mower.

micleg
Beiträge: 27
Registriert: Sa 1. Jul 2017, 14:36
Wohnort: Linköping, Sweden
Mäher: Husqvarna Automower 330X
Firmware des Mähers (MSW): MSW 4.xx.xx
Herstellungsjahr: 2014
Robonect-Modul: Robonect Hx (Rev.4)
Robonect Firmware: 1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von micleg » Mi 27. Nov 2019, 19:26

Terminate? It is set to turn off with the main power switch on the mower. That is all I have done.
AM 330X 2014 LED
Robonect 4, 1.1b

Benutzeravatar
SenfmitHonig
Beiträge: 225
Registriert: So 30. Okt 2016, 22:39
Wohnort: 943xx
Mäher: Husqvarna Automower 430X
Firmware des Mähers (MSW): MSW 6.xx.xx
Herstellungsjahr: 2016
Robonect-Modul: Robonect Hx (Rev.2)
Robonect Firmware: V1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von SenfmitHonig » Mi 27. Nov 2019, 19:49

Servus,
http://-ROBONECT-IP-/service
--> shut down (herunterfahren)

This should disable the Robonect module permanently to the following switch on.
;)

micleg
Beiträge: 27
Registriert: Sa 1. Jul 2017, 14:36
Wohnort: Linköping, Sweden
Mäher: Husqvarna Automower 330X
Firmware des Mähers (MSW): MSW 4.xx.xx
Herstellungsjahr: 2014
Robonect-Modul: Robonect Hx (Rev.4)
Robonect Firmware: 1.1b

Re: AM330X reconnects to WLAN even when it is off

Beitrag von micleg » Mi 27. Nov 2019, 20:09

Okay, I can try that.
AM 330X 2014 LED
Robonect 4, 1.1b

Antworten

Zurück zu „Bug?“